# Parameter Tabelle

Was wir wohin schreiben

# Parameterliste der Industrial Version

**Parameter und Funktionen**

<span style="color: rgb(224, 62, 45);">Beachten Sie wenn Sie selber etwas Programmieren möchten auf diese Belegung!  
  
</span>

**Spindelwarmlauf:**

<table border="1" id="bkmrk-parameter-funktion-1" style="border-collapse: collapse; width: 100%; height: 298.969px;"><colgroup><col style="width: 50.0596%;"></col><col style="width: 50.0596%;"></col></colgroup><tbody><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter</td><td style="height: 29.7969px;">Funktion</td></tr><tr style="height: 30.7969px;"><td style="height: 30.7969px;">500</td><td style="height: 30.7969px;">Drehzahl Stufe 1</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">501</td><td style="height: 29.7969px;">Dauer Stufe 1</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">502</td><td style="height: 29.7969px;">Drehzahl Stufe 2</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">503</td><td style="height: 29.7969px;">Dauer Stufe 2</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">504</td><td style="height: 29.7969px;">Drehzahl Stufe 3</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">505</td><td style="height: 29.7969px;">Dauer Stufe 3</td></tr></tbody></table>

**Überwachungsparameter**

<table border="1" id="bkmrk-anzeige-eingang-inve" style="border-collapse: collapse; width: 100%;"><colgroup><col style="width: 25%;"></col><col style="width: 25%;"></col><col style="width: 25%;"></col><col style="width: 25%;"></col></colgroup><tbody><tr><td>Anzeige</td><td>Eingang</td><td>Invertieren</td><td>Überwachen</td></tr><tr><td>Druckluft</td><td>510</td><td>511</td><td>522

</td></tr><tr><td>Servo X</td><td>512</td><td>513</td><td>523</td></tr><tr><td>Servo Y</td><td>516</td><td>517</td><td>524</td></tr><tr><td>Servo Z</td><td>518</td><td>519</td><td>525</td></tr><tr><td>Servo Slave</td><td>520</td><td>521</td><td>526</td></tr><tr><td>Not Aus</td><td>514</td><td>515</td><td>527</td></tr><tr><td>  
</td><td>  
</td><td>  
</td><td>  
</td></tr></tbody></table>

**Werkzeuglängenvermessung:**

<table border="1" id="bkmrk-parameter%3A-506-x-pos" style="border-collapse: collapse; width: 100%; height: 297.969px;"><colgroup><col style="width: 50.0596%;"></col><col style="width: 50.0596%;"></col></colgroup><tbody><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 528</td><td style="height: 29.7969px;">X Position</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 529</td><td style="height: 29.7969px;">Y Position</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 530</td><td style="height: 29.7969px;">Z -Startposition</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 531</td><td style="height: 29.7969px;">Z-Suchende</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 532</td><td style="height: 29.7969px;">Taster Referenzposition</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 533</td><td style="height: 29.7969px;">Fahrgeschwindigkeit</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 534</td><td style="height: 29.7969px;">Schnelle Antastung</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 535</td><td style="height: 29.7969px;">Langsame Antastung</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 536</td><td style="height: 29.7969px;">Rückzugweg</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter: 537</td><td style="height: 29.7969px;">Wartezeit zweite Tastung</td></tr></tbody></table>

**Zyklen:**

Parameter Bohren

<table border="1" id="bkmrk-parameter-bezeichnun" style="border-collapse: collapse; width: 100%; height: 278.172px;"><colgroup><col style="width: 50%;"></col><col style="width: 50%;"></col></colgroup><tbody><tr style="height: 29.7969px;"><td style="height: 29.7969px;">Parameter</td><td style="height: 29.7969px;">Bezeichnung</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">538</td><td style="height: 29.7969px;">X Startposition</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">539</td><td style="height: 29.7969px;">Y Startposition</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">540</td><td style="height: 29.7969px;">Sicherheitshöhe</td></tr><tr style="height: 10px;"><td style="height: 10px;">541</td><td style="height: 10px;">Startposition Z</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">542</td><td style="height: 29.7969px;">Bohrtiefe</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">543</td><td style="height: 29.7969px;">Rückzugshöhe</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">544</td><td style="height: 29.7969px;">Vorschub</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">545</td><td style="height: 29.7969px;">Drehzahl</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">546</td><td style="height: 29.7969px;">Anzahl der Bohrungen</td></tr></tbody></table>

<table border="1" id="bkmrk-547-abstand-der-bohr" style="border-collapse: collapse; width: 100%; height: 297.969px;"><colgroup><col style="width: 50%;"></col><col style="width: 50%;"></col></colgroup><tbody><tr style="height: 29.7969px;"><td style="height: 29.7969px;">547</td><td style="height: 29.7969px;">Abstand der Bohrungen</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">548</td><td style="height: 29.7969px;">Winkel der Bohrungen</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">549</td><td style="height: 29.7969px;">Spanbruch Zustellung

</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">550</td><td style="height: 29.7969px;">Rückzug Spanbruch</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">551</td><td style="height: 29.7969px;">Durchmesser Kreis</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">552</td><td style="height: 29.7969px;">Startwinkel Kreis Bohrung</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">553</td><td style="height: 29.7969px;">Länge X</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">554</td><td style="height: 29.7969px;">Länge Y</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">555</td><td style="height: 29.7969px;">Durchmesser Werkzeug</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">556</td><td style="height: 29.7969px;">Gesamttiefe der Tasche

</td></tr></tbody></table>

<table border="1" id="bkmrk-557-zustellung-schri" style="border-collapse: collapse; width: 100%; height: 297.969px;"><colgroup><col style="width: 50%;"></col><col style="width: 50%;"></col></colgroup><tbody><tr style="height: 29.7969px;"><td style="height: 29.7969px;">557</td><td style="height: 29.7969px;">Zustellung Schritt Z</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">558

</td><td style="height: 29.7969px;">Seitliche Zustellung</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">559</td><td style="height: 29.7969px;">Schlicht Aufmaß</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">560</td><td style="height: 29.7969px;">Eckenradius

</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">561</td><td style="height: 29.7969px;">Kreisdurchmesser</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">562</td><td style="height: 29.7969px;">Starpunkt X</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">563</td><td style="height: 29.7969px;">Startpunkt Y</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">  
</td><td style="height: 29.7969px;">  
</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">  
</td><td style="height: 29.7969px;">  
</td></tr><tr style="height: 29.7969px;"><td style="height: 29.7969px;">  
</td><td style="height: 29.7969px;">  
</td></tr></tbody></table>

Bei weiteren Zyklen werden bereits vorhande Parameter weiterverwendet:  
Beachten Sie dieses bei der Dateneimgabe.